Nissan 370Z Tech Forums banner

1 - 9 of 9 Posts

·
Registered
Joined
·
587 Posts
5x114.3 is the right bolt pattern, but +32 is a pretty high offset. they would be really tucked in. +22 or +25 would be a better look. And if you are going to spend money on new rims Why would you not go wider than stock like a 8.5 front and a 9 or 9.5 even 10.5 in the rear? more rubber means better traction

But hey, they are good looking rims
 

·
Registered
Joined
·
346 Posts
Discussion Starter #5
i also found:

> RP03 Silver 19x10 5x114.3 +22
> RP03 Silver 19x9 5x114.3 +18

So the front will be good since they are +22 but the rear will stick out a lot since they are +18 right?

Also, is RP brand a good one?
 

·
Registered
Joined
·
85 Posts
Uh, Bubble, is your Z a FWD conversion? I ask because we normally put the wider wheel on the rear axle. I know, it's probably a typo!

There isn't much difference between a 22 and an 18mm offset...that's less than 1/4". But combined with the 10" wheel the outside of the wider rim will be about 1/3" further towards the outside than the narrow one. This assumes that the widths and offsets in your post are correct.
 

·
Registered
Joined
·
315 Posts
Originally posted by Bubble@Oct 18 2004, 04:12 PM
how about PIAA Super Roza? Is anyone in here using them?

Their nice. My friend sold a pair to a dude with a G35. Deep polished dish. :thumbsup:
 
1 - 9 of 9 Posts
Top