[DiRN]

Josh, don't forget to see if your friend can do the write up on the headlights. Thanks

 

[Zxrage]

One of my next how-to's is to mount a body kit.. I am still waiting for my turbo kit to do other things, but we will see.

 

[AYREC]

Hey guys. How about a how to on swapping stock rotors to bigger ones and a how to on changing the stock brake pads?

 

[Bebopin Spike]

How to gut the stock cats?

 

[bradteed]

I vote for Dynamat - broken into two projects

1. Rear speakers back (rear section under hatch)
2. Rear speakers forward

thanks

 

[JTS2005]

Originally posted by bradteed@Jul 23 2004, 06:55 AM
I vote for Dynamat - broken into two projects

1. Rear speakers back (rear section under hatch)
2. Rear speakers forward

thanks

dang toykilla did this on his BY but then he wrecked it!! i think he maybe doing it again but i dont know how soon that would be.

 

[350ed]

Originally posted by AYREC@Jul 22 2004, 10:06 PM
Hey guys. How about a how to on swapping stock rotors to bigger ones and a how to on changing the stock brake pads?

AYREC, you don't switch to bigger rotors unless if you go to a big brake kit. You can change your rotors to slotted but it won't help much.
To swap your rotors, take off the wheel, unbolt the caliper and yank em off.

 

[mdzowner]

can you do a write up on how to trake the entire car apart. in the rain.
pleaeeease. just kidding. i second the dynamat. im thinking of doing it real soon. im guessing its a decent amount of workremoving all the int. trim. Also does anyone have experience getting the carpet up.is it glued down?.
thanks
mdzowner

 

[toykilla]

no the carpet is not glued down. you just need to remove anything/everything that is holding it down (seats, console, plastics, etc..)

 

[buzam]

Originally posted by Lo Fi Ched@May 28 2004, 08:42 AM
Something a little different.  I'd like to see a passenger side airbag cutoff switch.  My roommates just had a baby and I want to be able to turn the airbag off if I should need to have the baby in my car.

Wanted to drop a quick note on the post for Air Bag cutoff. Here is some info since I just ent thru the process myself.

the 03 has a generation 1 airbag, it is not applicable to any generation 2 car as the the G2 has a sensor in the seat. the way to tell is if you put something under 100lbs in the seat an led on the dash will light indicating the air bag will not deploy.

anyway here is your process

1. Go to US DOT website and download the "request for Airbag on-off switch" form. they give you a fax number to fax it to. here is the link - www.nhtsa.dot.gov/airbags/rule/section09.html - form link - www.nhtsa.dot.gov/airbags/brochure/req_form.html
2. Within about 2 weeks of faxing it you will recieve a letter from DOT authroizing you to install. Their website will also give you the local/regional companies that are authorized to install the airbags. Most dealers are not authorized and this is a liablity issue, so who ever installs has a big insurance policy!
3. present the letter to Nissan and they can order the kit. Now it took 2 weeks form my dealer to find the proper information so here are the part numbers you will need :

a. B5580-77J02 - SW Kit-Air Bag
b. 24170-CD025 - Harn Air Bag

the kit comes with awesome directions, however, the certified installer must signoff on the DOT approval and send it back in so in the event there is ever an accident and it did not work as proposed - they hold liablity. if you do the mod.....we'll you know how it goes.

it is very extensive as the front dash has to come off, the center console comes off, the speaker housing. their is an indicator lamp that mounts in the overhead cabin lights (between them by the Rview mirror) and you will loose a small compartment above the glove box as the switch mounts inside the compartment.

Hope this helps.

 

[GSoccer24]

how about how to run speaker wire into the front doors through those **** Molex plugs or whatever they are!! grrrr...

 

[hugo1669]

How about how to install a crank pulley.

 

[toykilla]

**** those molex plugs!... open them up and drill a hole through the end that does not have wires in it already.. run the wires thorugh

 

[onii]

i really need a guide with pics on how to change my tranny fluid. wanna get rid of notchy shiftin

 

[Silver]

I really would like to see where I can get all those cables through my car (Chinch- / 12V Power- / Soundcables) and where I can find de BOSE Amp... woul'd be nice if you could give me a guide

thx

 

[LBSOHK]

Originally posted by Hugo1669@Aug 19 2004, 06:34 AM
How about how to install a crank pulley.

I'll do it on my next oil change..

 

[dskang100]

How to DIY a subwoofer to stock decks (bose or non-bose).. specifically an Infinity Basslink

 

[Mukrat]

A How-To on How To make the links work in the other DIY Threads?

 

[Geary]

Don't know of you can swing it, but how about:

1. pop-out tire shreading spinners
2. .30 cals mounted behind the HIDs
3. passenger ejection seat

These would be great for starters!

BTW, I can get the belted .30 cal ammo if you can't.

 

[studybuddy]

Originally posted by onii@Aug 21 2004, 04:59 PM
i really need a guide with pics on how to change my tranny fluid.  wanna get rid of notchy shiftin

:bump: I second that...