[dsoZ]

Hello everyone!

I have a set of enkei rpf1s about to go on the car. I did the calculations and the tire size I want:
Sumitomo htr z iii
265/40-18 f
275/40-18 r

1010tires says the rear is 0.3inches taller than the front. My question: has anyone ran this size or diameter and run into problems with Vdc? I've read that it should be between .5-1.0" difference but the oem 17" set up is .4.

Experience? Thoughts? Thanks in advance!

Dso

 

[dkmura]

Those sizes whould work fine. There are many Z33s running a square setup without running into VDC issues.