Nissan 350Z / 370Z Tech Forums banner

Jacking the Z up

4346 Views 6 Replies 6 Participants Last post by  craigy
I have two ramps that I can back the Z onto to work underneath on the exhausts and stuff...but you can't drive up into the ramps to lift your front up if you wanted to work on headers. any suggestions how to get underneath the front of the car. plus,,do you need to use a power jack to lift up one end then place some stands there? very lost
1 - 1 of 7 Posts
What i do is remove my front bumper (which can be done in about 10-15 minutes) and drive my car up on ramps.
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.