I have an 06 roadster and the procedure changes slightly... after you pull up the little rubber mat in the nav box, there are 2 little plastic pieces on the left and right side you need to pop out, there are no screws there, the only screws are the ones that are what you would normally remove under the nav box (I've attached a pic), and it seems the 06 won't handle the same bracket for radio mounting (slight change so it won't come flush), but the wiring harness is still the same atleast)...
1st pic is how you get to the screws now, the 2nd is the plastic pieces removed, they just pop out w/ a little coaxing with a small flathead
[attachmentid=13360]
[attachmentid=13361]
1st pic is how you get to the screws now, the 2nd is the plastic pieces removed, they just pop out w/ a little coaxing with a small flathead
[attachmentid=13360]
[attachmentid=13361]
