Joined
·
1,955 Posts
[HOW-TO] Blow Off Valve On An Ati
1 - 3 of 3 Posts
Joined
·
16,332 Posts
**Tutorial moved to wiki**
http://www.350z-tech.com/zwiki/Tutorial:Bl...With_Procharger
http://www.350z-tech.com/zwiki/Tutorial:Bl...With_Procharger
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Water meth injection install and questions
How To ArticlesInstalling a snow performance stage 2 kit on my 03 350z. I am in the 700hp club with twin turbos and built motor. I'll be posting pictures and a write up of the install because I'm really not finding any in depth install pics. Currently I'm doing an overhaul on the motor and fuel system and...- 4
- 269
-
Chunk0806 · updated
-
Engine Mount Replacement Without Engine Removal
How To ArticlesI am curious to see if anyone has any tips on removing the top nut on the mounts without removing the engine or dropping the subframe. My main focus is the passenger side mount. Given it's location it seems impossible to access the nut. I know two of the sources I have looked at while...- 2
- 202
-
813_350z · updated
-
Clutch Master/Slave Cylinder Replacement
How To ArticlesSo, 1st official post & I'm going to try my hand at a How To on my 05 Enth Conv. -- Background -- I've owned the car for ~2 years & put roughly 20,000 miles on it. Just hit 70,000 miles & over the course of the last 10,000 I've had issues with my clutch pedal. Originally, in hot weather...- 8
- 32K
-
Will it work
How To ArticlesI have a 2003 Nissan 350z it's an automatic want to make it a manual if I buy a engine with the transmission and ecu plus everything for the clutch and pedals will it work- 1
- 1K
-
[HOW-TO] Do the Nasty in the Z
How To ArticlesWell, here is a basic tutorial on how to make the best of a small amount of space. I've seen a few threads on this, with people saying it is or isnt possible, but so far (to my knowledge) no one has done a writeup - here goes: 1 - First, you need a willing and able partner. Explain to...- 94
- 34K
-
jetpilot718 · updated
Join now to ask and comment!