Greddy Twin Turbo getting installed

3123 Views 9 Replies 6 Participants Last post by KShep, Mar 29, 2005

mikex350

Discussion Starter · Mar 23, 2005

After months o research on the greddy turbo kit. I finally figured out my setup.
My Track 350z is currenty at Street Image, a shop well known for installing turbos for the z'z. I am getting the Greddy twin turbo intercooled installed, as well as Walbro fuel pump, NGK one step colder spark plugs, Greddy type RS blowoff valve, Blitz dual turbo timer, Greddy e-01 profect boost controller, Cobalt boost and water gauge, along with AEM wide band air/fuel gauge, defi control unit, and defi indicator. I can't wait, i only have four more days to go. =) Time to go boost crzy

Save

1 - 10 of 10 Posts

KShep

· #2 · Mar 23, 2005

Congratulations and good luck with your F/I project.

Before you go too crazy...recommend you browse this thread.

http://www.350z-tech.com/forums/index.php?showtopic=6654

Save

jinxxycat

· #3 · Mar 23, 2005

Def. an article to read before you start boosting around...careful...

Save

boostd350z

· #4 · Mar 23, 2005

Take it from a couple of people that have popped VQ35's...don't go boost crazy until to have properly built your engine and tuned it...even then the realm hasn't been fully discovered. We are all still experimenting with the built VQ's.

Save

KShep

· #5 · Mar 23, 2005

[/quote]
+1...good advice. I was very careful and thought I had done everything I could to prevent a blown motor...I was wrong.

http://www.350z-tech.com/forums/index.php?showtopic=6864

Save

Going Deep

· #6 · Mar 25, 2005

Congrats, nothing like the sound of boost!!

Save

mikex350

Discussion Starter · #7 · Mar 29, 2005

[/quote]

errr, my car is taking longer than expected. going deep, i love your car btw. Nicely done.

Save

KShep

· #8 · Mar 29, 2005

[/quote]

errr, my car is taking longer than expected. going deep, i love your car btw. Nicely done.
<div align="right">[snapback]86304[/snapback]
[/quote]
This is not unusual...better to take it slow and have a good install than rush it. Be patient.

Save

Gilley

· #9 · Mar 29, 2005

Kshep it looks as though you had some nitrous in those pics too. if so what kind of shot where you spraying?

Save

KShep

· #10 · Mar 29, 2005

[/quote]
No spray for me...might rig up something to spray the intercooler if the temps dictate but just trying to get her put back together now...

Save

1 - 10 of 10 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month