Alright.. been doing some hours of research asking people around and finally found someone with the same set up as I have.
I have GT7s with the following setup:
Front: 19 x 9.5 (+30 Offset) 245/35/19
Rear : 19 x 10.5 (+24 Offset) 275/35/19
I will be lowering my car with Eibach Pro Kit this weekend and will post some before and after pics. Hopefully it wont rub and i wont have to roll my fender. Wish me luck guys !
I finally did it...lowered my Z with Eibach Pro Kits. I was afraid that my rear fender was gonna rub but luckily, no rub at all. With a help from my friend, I was able to get it done in 3 hours.
So for anyone who is hestitating to lower their car and fear that their rear fenders gonna rub, it wont so go for it.
Here is my set up.,
Front: 19 x 9.5 with +30 Offset (245/35/19)
Rear: 19 x 10.5 with +24 Offset (275/35/19)
I will post some pics tomorrow. Just wanted to share the info.
The car looks million times better lowered now and reduced a lot of the wheel gap.
The springs have settled a lot more than what it shows on the pic. Just for the measurement sake, on the rear, It was about 3.5 fingers gap and now barely a finger. AND NO RUBBING !!!...
I have a problem with my windows on a 2005 350Z. I have replaced the window motors on both sides. If the windows are down, and I close the door, the windows automatically go to the up position, even with the power turned off. Please help. This is driving me nuts.
I want to purchase a set of Varrstoen Es1, I just don't know what offset I would need. Im looking to get 18x8.5 in the front and the only available is +35, and 18x10.5 in the rear and +22 and +15 are only available for the rear. I don't know much about wheels and tires and I need some help...
Hello everyone.
Just wanted to share a useful resource for those looking to find recommended tire pressure settings for their Nissan model.
Nissan Tire Pressure
Hope this helps!
So I got an 05 Z I bought already on coils but it’s on stock wheels and tires which looks terrible. It’s on 235/50/17 right now all the way around and I want to run some 18/11+25 in the rear and 18x10+27 in the front but I don’t know how that will look fitment wise after I roll the fenders...
A forum community dedicated to Nissan 350Z / 370Z and Infiniti G35 / G37 owners and enthusiasts. Come join the discussion about performance, modifications, troubleshooting, exhaust, turbos, maintenance, and more!
