[Fooch]

Please excuse my ignorance; but, I constantly see people talking about gearing, and I really am not sure exactly what it is. I LOVE cars and read anything I come across that has anything to do with them. I am constantly wandering over to howstuffworks.com and just read for hours on car related stuff. I can't find anything on what gears ratios are and gearing and all that stuff but I want to learn it. I know a decent amount of stuff but when it comes to the tranny my knowledge drops off. If anyone could direct me on where to find something like this or tell me would be great.

 

[LBSOHK]

how stuff works

another Link


have fun studying

 

[juanjo_z]

Check out the same website:

Transmissions

Gear-Ratios

Gears

Basically, the lower the gear ratio, the faster it runs. Also, the higher the gear reduction, the more torque it creates.

 

[Fooch]

I already read both of those lol. I know basically ow trannies work. But I am not sure like how they work when you start replacing parts like final drives and stuff. Like what happens to causes the acceleratiion to be quicker when you put in a higher final drive gear? How the parts go in, figures, and what exactly does this replace? I am not exactly sure what gears these are replacing. Is this a tranny or differential mod?

 

[Fooch]

Ok, I got some reading ahead of me lol. Thanks fro the quick replies. I will read them and let know know if it was what I was looking for. Thanks again.

 

[thrlskr]

Why I wish there was only one 350z site...

 

[Fooch]

I am sorry for posting on all the 350 sites. But when I modded my eclipse sometimes I would get nothing from the other 2 3G sites and a lot from the third. Some people didn't frequent all three and if I wouldn't have done it I wouldn't have known half of what I know now. If there is one of these sites that I should stick to asking questions in, please let me know which is the best as far as technical stuff.

 

[DiRN]

Don't worry, the majority of people on this site are here to help and don't care if you ask the same question on 20 different sites. Having only one site would make it easier, but that's just never going to happen. The more people who drive the car, the more sites there will be

 

[Juztin]

My real question regarding gearing, is if I were to swap in a auto ring & pinion gear, would that bump the 6 speed manuals top speed to a little over 200mph?

 

[LBSOHK]

I have no answer for you ,
but I have a question - why would you need a top speed of 200 mph ?

 

[thrlskr]

Originally posted by Fooch@Oct 13 2004, 04:37 AM
I am sorry for posting on all the 350 sites. But when I modded my eclipse sometimes I would get nothing from the other 2 3G sites and a lot from the third. Some people didn't frequent all three and if I wouldn't have done it I wouldn't have known half of what I know now. If there is one of these sites that I should stick to asking questions in, please let me know which is the best as far as technical  stuff.

I appologize for not being clear about my gripe. There is NOTHING wrong with posting on all the sites, in fac t you're right it is the best way to get a good answer. IMHO there are too many 350z sites. I wish that all 350Z owners would gravitate toward the best moderated site and that the less visited sites would disappear. With only one source that is very heavily visited a greater number of people would respond AND there would be one comprehensive source to search instead of many poor sources.

I hope I didn't/don't sound like an ass; I was the guy providing you with the information you needed on the other forum. I am just a bit spoiled. As miata enthusiats there is just one "good" site, miata.net, with 20K users. The knowledge base is vast and very quick to respond.

I don't doubt that aftersome time there will be a consolidation of 350z sites as well. Or at least I hope so!

$0.02
Nick

 

[thrlskr]

Originally posted by Juztin@Oct 17 2004, 10:38 AM
My real question regarding gearing, is if I were to swap in a auto ring & pinion gear, would that bump the 6 speed manuals top speed to a little over 200mph?

If you provide the specs for the ring and pinion I will provide your top speed (gearing limited top speed, not drag/hp limited speed).

 

[nismokid]

Hmm, I don't know how to calcuate gearing/speeds. Here's a cool picture of the velocity vs rpm for each gear of the Bugatti Veyron. Notice that 0-60mph is all 1st gear and top speed is over 240mph...

 

[thrlskr]

Now you can all figure out how the final drive will effect your top speed.

Gear Calculator

 

[sushantjare]

the gear ratio is 100