[whoakevo]

hey guys im just wondering wat a bone stock 350z touring 6mt would get to the wheels any 1 got any idea?

 

[TrackZ03]

You're probably looking at anywhere from 225 to 240 rwhp. Many factors including type of dyno used, temperature, etc will influence the results.

My highest bone stock was 237 rwhp last summer. My stock dyno

 

[smoothz]

Scott is correct. You'll normally see around 235, give or take a few depending on conditions on equipment.

I dynoed mine after all the mods and got about 251hp and 251ft-lb of torque. The temps outside were close to 0ºF, but the inside of the garage was about 60.

 

[OBSESSED]

Interesting. So advertised hp is at the crank I assume. My first mod will be the greddy twin turbo kit....I'm hearing about 340 rwhp!...

http://www.350zmotorsports.com/grtwtukit.html

 

[TrackZ03]

[/quote]


Yep. 287hp is est. at the crank...figuring an 18 to 20% drivetrain loss to the wheels.