Nissan 370Z Tech Forums banner
1 - 15 of 15 Posts

·
Registered
Joined
·
297 Posts
Discussion Starter · #1 ·
Was out with my boss today who was having his Clubsport tuned. Whilst we were there they put his car on the dyno. He was producing 260kw @ crank and 243kw @ the rear wheels (VY Series II "285"). Funnily enough the tuner said they were good numbers for his car as most of them produce 250-255 at the crank (on his dyno that is)

As we were there I took the opportunity to put the Z on the dyno to see what the numbers looked like (was 33 degrees at the time).

My only engine mods are a JWT Popcharger and Kinetix V4 plenum. Until I compared my outputs to everyone else's I was a bit disappointed. My chart showed 190.1kw at the crank and 163.3kw at the wheels. The surprise for me was that this was acheived at 7,110RPM !!!!

I thought for ease of future reference I would also include the dyno results for other Aussie members with their mods.

Maybe the mods would be nice enough to pin this post??? And no, I'm not trying to start a pissing contest.
 

Attachments

·
Registered
Joined
·
297 Posts
Discussion Starter · #2 ·
nang3 with his Hi-Tech cats and exhaust
 

Attachments

·
Registered
Joined
·
297 Posts
Discussion Starter · #3 ·
DavidM with his Hi-Tech
162.1 @ 6,400
 

Attachments

·
Registered
Joined
·
297 Posts
Discussion Starter · #4 ·
Mr Rizk with Amuse exhaust
166.1
 

Attachments

·
Registered
Joined
·
297 Posts
Discussion Starter · #5 ·
zuff with Hi-Tech exhaust
171.5
 

Attachments

·
Registered
Joined
·
297 Posts
Discussion Starter · #6 ·
zzz-35 with Hi-Tech exhaust
162.5 @ 6,731
 

Attachments

·
Registered
Joined
·
297 Posts
Discussion Starter · #7 ·
Narsty123 with APS Exhaust

162.9kw
 

·
Registered
Joined
·
297 Posts
Discussion Starter · #8 ·
Mikenbn with JWT Popcharger
153.3
 

Attachments

·
Registered
Joined
·
297 Posts
Discussion Starter · #9 ·
Oops sorry. Mikenbn with Popcharger and APS exhaust
164.1kw
 

Attachments

·
Registered
Joined
·
297 Posts
Discussion Starter · #10 ·
Mchapman with bHi-Tech and Unichip
164.5kw
 

Attachments

·
Registered
Joined
·
297 Posts
Discussion Starter · #11 ·
David with APS TT
276.7kw
 

Attachments

·
Registered
Joined
·
297 Posts
Discussion Starter · #13 ·
[/quote]

I totally agree. Just thought it would be good to have them all on one post after having mine done. The thing I was mainly looking for was the RPM where power was produced because mine was so far up the rev range @ 7,100
 

·
Registered
Joined
·
297 Posts
Discussion Starter · #15 ·
[/quote]

Thanks for that David. I've got an auto touring (17" wheels) and the speed recorded was 208.5km/h. Is someone cleverer than me able to work out my revs from this info??

I do have the Kinetix plenum which could account for some difference and the guy that did the dyno run made about 4 adjustments on test runs to work out the gears, rev limits etc before doing the full dyno test. He's a very highly rated mechanic in Perth and works pretty much exclusively on HSV vehicles.
 

·
Registered
Joined
·
297 Posts
Discussion Starter · #18 ·
Thanks Harry - any mods??
 

·
Registered
Joined
·
297 Posts
Discussion Starter · #24 ·
[/quote]

Thanks David - 6,000RPM sounds a lot more realistic
 
1 - 15 of 15 Posts
Top