Nissan 350Z / 370Z Tech Forums banner

Cusco A-Arms

1266 Views 9 Replies 5 Participants Last post by  JTS2005
Trying to dig up info.. Specs, pricing.. etc..


See less See more
1 - 3 of 10 Posts
The key thing to look at if you are interested in taking camber out is the ball joint package design. It needs to be a tight package for it not to bottom out on the chassis when the suspension is compressed. From the picture those arms will not allow for taking much camber out of the front.
1 - 3 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.