Nissan 370Z Tech Forums banner

Status
Not open for further replies.
1 - 20 of 25 Posts

·
Registered
Joined
·
181 Posts
Discussion Starter #1
Here is something that we are almost finished putting together , a kit for the CAI Systems. They are based on the AEM, Injen systems right now , but if any body has something different just e-mail and we can do a custom setup . Playing around with the colors here is some color schemes that are available but any color combination can be done . What do you think
 

Attachments

·
Registered
Joined
·
1,735 Posts
They do look very nice
 

·
Premium Member
Joined
·
5,911 Posts
Not having either of those CAIs, I have to ask, where would this go? My only thought is connecting the CAI to the plenum.
 

·
Registered
Joined
·
181 Posts
Discussion Starter #5
First one would go out of the Plenum, second one would go into the Mass Air Sensor , the third one comes out of the Mass Air Sensor
 

·
Registered
Joined
·
1,497 Posts
Terry- Think you can come up with something for the Popcharger?
 

·
Registered
Joined
·
181 Posts
Discussion Starter #8
I can get single ring locks for Pop Chargers sizing from 2 1/2 " to 3 " this would be the Inside Diam . The Cost of the CAI Intake kit would be around $180.00 Canadian
 

·
Premium Member
Joined
·
5,911 Posts
Originally posted by Redefined350z+-->QUOTE(Redefined350z)
Pardon my stupidity, but what exactly does it do?
These replace stock and manufacturer provided pieces that connect various parts of CAIs.

<!--QuoteBegin-ssgtbarclay

How about all chrome for the K&N system?
I had thought about blue to go with my K&N, but I could really only think of one location (tube to plenum) where one would actually be used
 

·
Premium Member
Joined
·
5,911 Posts
There is really only one visible portion of the K&N that would benefit from a nicer lock (picture below). The only other place that could possibly benefit from one is where the tub connects to the cone, but that's under the heat shield
 

Attachments

·
Registered
Joined
·
909 Posts
Very nice, I was wondering when smeone was going to come out with these. I found a chrome ring lock from an auto parts store that looked a little bitbetter than the stock ring lock for the pop but I definately need to replace it with these. :thumbsup: :thumbsup:
 

·
Registered
Joined
·
305 Posts
zeetoyz are you just selling the lock rings are do you also sell other parts that fit the Z? If not where would I be able to find the K&N Typhoon Intake System for cheap. I am looking for the Chrome one with the Carbon Fiber box.

Thanks

ssgtbarclay
 

·
Premium Member
Joined
·
5,911 Posts
Not to hijack the thread, but Hopup Racing has the polished and the silver for $250. And Modacar has polished, blue, and red for $235.
 

·
Registered
Joined
·
181 Posts
Discussion Starter #20
That's why they call them Induction Locks , I have sold them to all sorts of Turbo , Supercharged Applications , I have had them on my Stillen unit for 6 mths ,no problem. We are just know fitting for ATI , APS . For tube to tube applications you would use the single ring pictured here.All the Rings will come with Silicone Hose.
 

Attachments

1 - 20 of 25 Posts
Status
Not open for further replies.
Top