Nissan 370Z Tech Forums banner
1 - 12 of 12 Posts

·
Premium Member
Joined
·
2,562 Posts
Discussion Starter · #1 ·
Was wondering if anyone would be interested in a Dyno Day at Mac Autosport; http://www.macautosport.com/. They are located in Parker so I know that its close-by for the Denver guys & girls. I would like to keep it a Z event. For those that haven't been there, Bill & Nick are very friendly and very educated in the Z platform. They also have several products for the Z. The dyno is a DYNOJET 248/224 Inground All-Wheel Drive, Rolling Chassis Dynamometer. I think I need like 10-20 people to confirm the day for us. Don't quote me on the price but "should" be around $45 for 3-pulls w/ air-to-fuel ratio. This could be a very fun event with the hope of seeing some awesome numbers. For the new Z owners that haven't started modding yet I highly suggest this. Baseline numbers are a very good to know to see what gains you have achieved and where to go next. I'd like to see how many people are interested first and than I'll contact Mac to lock the date and confirm the cost.
 

·
Premium Member
Joined
·
2,562 Posts
Discussion Starter · #2 ·
So far this is who I have:
-Robert_K
-Resolute
-Spicoli (If has purchase '06 by date)
-colocomp (Z32)
-dkmura
-Burn (From 350ZMotoring.com)
-thegr8one99
-YOU?!?!?
 

·
Premium Member
Joined
·
2,562 Posts
Discussion Starter · #3 ·
Awesome Guys!!! Looks like between the Z33 & Z32 we have 10 people. I will now call Mac on Tuesday to set the date, ask about pricing and than ask how we will set times.
If you have a spefic time please post it.
 

·
Premium Member
Joined
·
2,562 Posts
Discussion Starter · #4 ·
Well I received a PM from Bill at Mac:
QUOTE("MACAuto")
Robert,
The 25th is OPEN as of today, and MAC would welcome your 350Z group. We would like to do baselines only on a group day, but if the number of participants is low enough, we could do either baselines or tune. Baselines would be $49.95 for 3 pulls.

We are particularly interested in seeing your group because TurboXS has announced the UTEC for the 350Z. MAC sells the UTEC for Subes, and EVOs, and tunes more of these sophistcated piggyback ECUs than any other shop in the west, so we are interested in discussing the UTEC with you, and the others in your group.

Finalize your plans for that date, and we will reserve the day for you. If you are interested in a UTEC, we sell them for $950. Give me a call.

Sincerely,
Bill McMahan
MAC Autosport. Ltd.
303-841-1176
So I'm going to go ahead and set the day for us. I will let you all know how to reseve you time slots.
I'm really looking forward to this and meeting all of you!!!
-Robert
 

·
Premium Member
Joined
·
2,562 Posts
Discussion Starter · #5 ·
I received another PM from Bill at Mac:
QUOTE("MACAuto")
Robert,
We're set for Feb 25th. You should set up and determine the run order, and when it is set, please forward to me so I know how to set up the day's times. We start at 10 AM, and usually the second car will go on at 11, and each baseline should start about 30 to 45 minutes after the previous one.

Call me for details.

Bill McMahan
MAC Autosport, Ltd.
So I would like for you all to PM (or e-mail: [email protected]) me your time request, Full Name, Yr and Model. To be fair this will be a first come, first served basis. Also I'm going to set it as a 45min pull. I'm also going to start the first pull at 10:15am to give them time to get the shop open.
10:15 Open
11:00 Robert
11:45 Open
12:30 Open
1:15 Open
2:00 Open
2:45 Open
3:30 Open
4:15 Open
5:00 Open Last pull
 

·
Premium Member
Joined
·
2,562 Posts
Discussion Starter · #6 ·
I'm not going to continue to update from date forward. If you are interested please E-mail me.
 

·
Premium Member
Joined
·
2,562 Posts
Discussion Starter · #7 ·
Only 4 slots left!!!

10:00/15 Walt 300ZX TT
10:30/45 Will 350Z Base
11:00/15 Robert 350Z Touring
11:30/45 Wayne 300TT
12:00/15 Iyah 350Z ENT
12:30/45 Shaun Z32
1:00/15 Travis Z32
1:30/45 Art 300TT
2:00/15 '97 240SX Turbo
2:30/45 Steve '93 240SX
3:00/15 Champ '97 240SX
3:30/45 Craig 350Z
4:00/15 Open
4:30/45 Open
5:00/15 Open
5:30/45 Open
 

·
Premium Member
Joined
·
2,562 Posts
Discussion Starter · #9 ·
You've got mail :wink:
Don't remember if I added you too the list. I hope so!!! If not here is the most updated list and some more info.

The 10am pull is now open. If you want to get dynoed let me know soon. I'm going to send the final list to Bill at Mac on the 20th.

Anyone else interested in getting dynoed?

This is the most updated list:

10:00/15 Open
10:30/45 Will 350Z Base
11:00/15 Robert 350Z Touring
11:30/45 Wayne 300TT
12:00/15 Iyah 350Z ENT
12:30/45 Shaun Z32
1:00/15 Travis Z32
1:30/45 Art 300TT
2:00/15 Blake '97 240SX Turbo
2:30/45 Steve '93 240SX
3:00/15 Champ '97 240SX
3:30/45 Craig 350Z
4:00/15 Tim 300ZX
4:30/45 Brian 350Z
5:00/15 Open
5:30/45 Open

Walt 300ZX TT Pending clutch replacement

And of course Springs guys we're still meeting up to convoy to Mac: http://my350z.com/forum/showthread.php?t=167516
 

·
Premium Member
Joined
·
2,562 Posts
Discussion Starter · #10 ·
Well someone was quick to grab that 10am pull! If anyone else wants to get dynoed let me know soon. I'm going to send the final list to Bill at Mac on the 20th.

Anyone else interested in getting dynoed?

This is the most updated list:

10:00/15 geezin56 350Z Touring w/ Stage 4 Stillen SC Open
10:30/45 Will 350Z Base
11:00/15 Robert 350Z Touring
11:30/45 Wayne 300TT
12:00/15 Iyah 350Z ENT
12:30/45 Shaun Z32
1:00/15 Travis Z32
1:30/45 Art 300TT
2:00/15 Blake '97 240SX Turbo
2:30/45 Steve '93 240SX
3:00/15 Champ '97 240SX
3:30/45 Craig 350Z
4:00/15 Tim 300ZX
4:30/45 Brian 350Z
5:00/15 Open
5:30/45 Open

Walt 300ZX TT Pending clutch replacement

And of course Springs guys we're still meeting up to convoy to Mac: http://my350z.com/forum/showthread.php?t=167516
 

·
Premium Member
Joined
·
2,562 Posts
Discussion Starter · #11 ·
ALL RIGHT TODAY IS THE LAST DAY TO SIGN UP! I'll be e-mail this final list to Bill tomorrow.
 

·
Premium Member
Joined
·
2,562 Posts
Discussion Starter · #12 ·
:irock: Everything is a go guys!!! :irock: Below is the PM from Bill saying the list looks good. IF you have any question feel free to ask or PM me!!!

QUOTE("MACAuto")
Robert,
Thanks for the run list. Everything looks good to go for Saturday. We will see you then. I will arrive at the shop at 9:45 to get this started.

Regards,
Bill McMahan
MAC Autosport, Ltd.
303-841-1176
And of course Springs guys we're still meeting up to convoy to Mac: http://my350z.com/forum/showthread.php?t=167516
 
1 - 12 of 12 Posts
Top