[jackwhale]

I see questions about jacking the car and changing brake pads and rotors. I changed my front rotors this weekend and took pictures while I completed the job. Very simple with only a few tools. I used a 1/2" drive torque wrench to torque the bolts to the correct tightness.

First drive up on home-made ramps.

 

[steve350z]

um, something is not right here

 

[jackwhale]

I couldn't get my photos to post. I didn't realize that part of the pictures did post. I'll try again.

 

[[email protected]]

email the pictures to me and I will post them for you...

parts at perfnissan.com

 

[g_torphins]

Any kindly soul be good enough to finish this write up!!?

Thanks
George

 

[toykilla]

wow.. old topic?

 

[jinxxycat]

Here is a tutorial for brake pads:

http://www.350z-tech.com/zwiki/Tutorial:Br...ad_Installation

this is for non brembo I believe but it can't be that different. And if the brembos are like the regular ones, the rotors are floating so it can't be that hard to swap them out! :cheers:

 

[g_torphins]

Thanks.
Had seen that thread but I beleive Brembos are slighty different :
there are cotter pins to remove aswell.
Just wasn't 100% sure so wanted to see some pictures!

 

[armitage]

^Yeah, I don't know for sure, but I thought I read another thread that said there were cotter pins to remove.