Nissan 350Z Forum, Nissan 370Z Tech Forums

Nissan 350Z Forum, Nissan 370Z Tech Forums (https://www.350z-tech.com/forums/)
-   Nissan 350Z (https://www.350z-tech.com/forums/173-nissan-350z/)
-   -   NEED HELP start signal issue (https://www.350z-tech.com/forums/173-nissan-350z/93859-need-help-start-signal-issue.html)

C.rettig1 05-08-2019 09:48 AM

NEED HELP start signal issue
 
Okay I'm new, I'm probably going to get torn to shreds but I deserve it.

Can't get my 03 Z to start using key.

I swapped an 07HR into my 03 car.
Got the harness converted and a NATS delete on my ECU.

When I go to use the key to start the security light stays on and no crank but a click at what I believe to be the BCM.

When I put key in start position, then put 12V to start signal wire directly from battery on wire pin at starter it STARTS and runs!
I've checked fuses and swapped relays to find the same results.
I have a switch set up but I really rather not start my car with extra steps and an idiot switch. Anyone got any ideas on why It clicks at BCM and won't send signal to the signal wire?

I'd really appreciate any help

dkmura 05-09-2019 11:27 PM

Still sounds like a NATS issue. How do you know NATS was completely disabled or removed?

C.rettig1 05-14-2019 05:03 PM

Quote:

Originally Posted by dkmura (Post 1254431)
Still sounds like a NATS issue. How do you know NATS was completely disabled or removed?

Yeah, I sent it to a tuner who removes it all the time and specializes in the HR swaps. Also the engine turns on and runs when I put 12v to the signal wire at the starter. I tried testing the volts at the ignition Itself, 12v but at the start signal fuse it's not 12. Not with key turn or anything. Just a click at the bcm

dkmura 05-15-2019 03:13 PM

Have you scanned both the BCM and ECM sections for codes held in memory?

C.rettig1 05-17-2019 05:55 PM

I haven't scanned the BCM so at the BCM can still store anything after the ECU been on programs that should be it, in the meantime I've just been using the direct switch I made

C.rettig1 05-17-2019 05:55 PM

If*

dkmura 05-17-2019 10:52 PM

Quote:

Originally Posted by C.rettig1 (Post 1254461)
If*

Not sure what you mean??


All times are GMT -4. The time now is 04:16 PM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.