PAC ROEM-NIS2 - Nissan 350Z Forum, Nissan 370Z Tech Forums
User Tag List

 
LinkBack Thread Tools Search this Thread
post #1 of 7 (permalink) Old 06-19-2008, 08:00 PM Thread Starter
Junior Member
 
Join Date: Dec 2007
Location: Melbourne
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
(Thread Starter)
Hi Guys,

I've been looking everywhere for an answer but have had no luck. I've read everywhere that the ROEM-NIS2 is only compatible with Bose systems up to 2005. I have an 06 with Bose and wondering if it can be used or what the differences are between the earlier model bose connectors and mine.......


Thanks!!
evse82 is offline  
Sponsored Links
Advertisement
 
post #2 of 7 (permalink) Old 05-16-2009, 02:17 AM
Base Member
 
vifer's Avatar
 
Join Date: Aug 2006
Location: Melbourne, Australia
Posts: 34
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Could anyone explain to me in electronic or audio terms what the PAC ROEM interface is designed to do ? I scrolled through numerous articles here and have yet to come across information on what it does. The PAC website is also very vague.

thanks
vifer is offline  
post #3 of 7 (permalink) Old 05-17-2009, 02:21 PM
Junior Member
 
Join Date: May 2008
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
QUOTE (evse82 @ Jun 19 2008, 06:00 PM)
Quote:
Hi Guys,

I've been looking everywhere for an answer but have had no luck. I've read everywhere that the ROEM-NIS2 is only compatible with Bose systems up to 2005. I have an 06 with Bose and wondering if it can be used or what the differences are between the earlier model bose connectors and mine.......


Thanks!!

i have 2006 nissan 350z and i install the Roem-Nis2 and i have no problem with it, and there was no change of wiring color that i notice.
dongbui is offline  
 
post #4 of 7 (permalink) Old 05-21-2009, 08:28 AM
Moderator
 
steve350z's Avatar
 
Join Date: Feb 2004
Location: Clarksville, TN
Posts: 5,137
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Garage
QUOTE (vifer @ May 15 2009, 11:17 PM)
Quote:
Could anyone explain to me in electronic or audio terms what the PAC ROEM interface is designed to do ? I scrolled through numerous articles here and have yet to come across information on what it does. The PAC website is also very vague.

thanks

simple, this device allows you to change out the factory head unit and keep the use of the amplifier. this is useful for those cars that have the bose system since the speakers are powered through the amplifier. on a non-bose system, it is a waste since it is not needed at all.

2013 370Z w/Sport Package, Midnight Blue
steve350z is offline  
post #5 of 7 (permalink) Old 05-21-2009, 07:10 PM
Base Member
 
vifer's Avatar
 
Join Date: Aug 2006
Location: Melbourne, Australia
Posts: 34
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
QUOTE (Steve350Z @ May 21 2009, 08:28 PM)
Quote:
simple, this device allows you to change out the factory head unit and keep the use of the amplifier. this is useful for those cars that have the bose system since the speakers are powered through the amplifier. on a non-bose system, it is a waste since it is not needed at all.
oh. not quite the answer i was looking for. Is it an active impedance box? Is it a line level booster or attenuator?
vifer is offline  
post #6 of 7 (permalink) Old 05-22-2009, 05:53 AM
Moderator
 
steve350z's Avatar
 
Join Date: Feb 2004
Location: Clarksville, TN
Posts: 5,137
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Garage
ah. i found this i hope it helps a bit

The OEM-1 interface is transformer isolated, maintains phase and is linear from 20 to 20,000 Hz. The input connectors plug into the aftermarket stereo and vehicle harness. Just like the factory stereo system, the warning chimes will play through the front left RCA output of the interface. Also, turning on the rear entertainment controls, if so equipped, will make the rear outputs of the interface play a second audio source.

The OEM-1 also gives you 2:1 gain as well as infinite attenuation. This allows signal adjustment to the correct level between the factory system and what is being added or changed. All four channels are individually adjusted for accurate sound levels. Each channel completely isolates the aftermarket equipment from the factory system to give 100% compatibility in every installation.

Features:

"plug and play" solution - no need to cut wires
Signal ground is also isolated to avoid ground loops
Linear from 20-20,000 Hz (+/- 0.5dB)
Maintains correct phase

2013 370Z w/Sport Package, Midnight Blue
steve350z is offline  
post #7 of 7 (permalink) Old 12-30-2017, 06:04 PM
Egbob51
Guest
 
Posts: n/a
Mentioned: Post(s)
Tagged: Thread(s)
Quoted: Post(s)
PAC Roem-nis2

Does anyone know if pac Roem-nis2 will work on 2008 with Bose? Thanks for any info
 
Sponsored Links
Advertisement
 
Reply

Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome