From Nissan 350Z & 370Z Wiki
This article is part of our special
collection:
This article is part of our special
collection:
This tutorial will show you how to remove and install the front strut tower bar. The steps are pretty simple but there are some key things to note to ensure everything goes together smoothly.
Contents |
Also See
Installation
- Remove the 2 studs on the top of the timing case.
- Install the Strut Tower Bar by bolting the end plates to the strut towers using the original mounting hardware, do not tighten at this time.
- Make sure the wire loom runs between the bars on the STB and that it is centered.
- Tighten the bolts on the end plates
- Done.
Factory Service Manual
|
|
||||
 |
|
|||
